Programmable Logic Controllers

Basic ControlLogix Maintenance & Troubleshooting

$1,450.00

Clear selection
SKU: N/A.

Course Description

This course is for those who have little or no working experience with ControlLogix systems and who need to interpret, make changes to, and/or draft Ladder Logic. Participants will identify the hardware associated with a Basic ControlLogix system, create and modify an RSLogix 5000 project, establish communications with a Controller, create and monitor Data Tags, document and search Ladder Logic.

Topics include: Communications, software menus, Digital and Analog I/O Modules, basic instructions, trouble-shooting features.

Labs include: Configuring communications drivers and setting IP addresses, configuring Digital and Analog I/O Modules, modifying and programming instructions (Relays (Bit), Timers and Counters, Program Control, Compare Compute, and Math) and analog scaling.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN


Advanced ControlLogix Maintenance & Troubleshooting

$1,450.00

Clear selection
SKU: N/A.

Course Description

This course is for those who develop, debug, program or maintain ControlLogix Controllers using Ladder Logic, Function Block, and Structured Text programming. Studens will be able to establish communications to a ControlLogix controller, explain the organization of a ControlLogix application, perform routine maintenance (create a new project, configure I/O, download/upload projects, going online, change processor modes, create and monitor tags, and edit the program.

Topics include: Major, Minor and I/O Faults, GSV and SSV instructions, Ethernet communications, ControlNet communications, and ADD-ON instructions, and an introduction to Ladder Diagram programming, Function Block programming, and Structured Test programming.

Labs include: Creating and programming Fault Routines, configuring and scheduling an Ethernet and ControlNet LAN and programing an ADD-ON Instructions.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN


Allen-Bradley Basic PLC 5

Course Description

This is a course introduces you to the hardware, programming techniques and basic instructions used in a PLC 5 system. Students will interpret, make changes to, and/or draft Ladder Logic, create, and modify an RSLogix 5 project.

Topics include: Hardware, software (program organization), addressing and addressing modes, the basic instruction set (bits, timers, counters, compare, and math), communications and programming, motor control circuits, alarming circuits, predictive maintenance circuits, troubleshooting techniques, and analog card scaling.

Hands-on exercises include: Establishing communications with a Controller, create and monitor Data Tables, document and search Ladder Logic, scale analog signals.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.

Allen-Bradley Advanced PLC 5

Course Description

This is a course introduces you to the hardware, programming techniques and advanced instructions used in a PLC 5 system. Students will interpret, make changes to, and/or draft Ladder Logic, create, and modify an RSLogix 5 project.

Topics include: DH+ network, software (program organization), advanced instructions (MCP, shift registers, sequencer, and PID), and data transfer.

Hands-on exercises include: Setting up a DH+ network, programming advanced instructions, programming messages for DH+ communications, transferring data between Scanner and Adapter Processors.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.

Allen-Bradley SLC 500

Course Description

This course examines SLC 500 hardware, system configuration and installation, basic instruction set and programming.

Real world examples of motor control circuits, alarming circuits, predictive maintenance circuits, troubleshooting techniques, analog cards, scaling, and much more is covered.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.

GE Fanuc Basic 90-30 using Proficy ME Software

Course Description

This course examines the Series 90-30 basic hardware and Proficy Machine Edition software. The back-plane, power supply, CPU, discrete and analog I/O modules are covered as well as project creation, hardware configuration, addressing, program organization and basic programming.

This course includes: Routine maintenance such as: going online, uploading/downloading, project backup, changing modes of operation, battery replacement, setting of the PLC time/date, changing addresses and editing variable descriptions.

Exercises include: Hardware configuration, programming basic instructions (relays, timers, counters, math, and compare), examples of control circuits, alarm circuits and analog scaling, and troubleshooting features of the software and I/O card maintenance.

PREREQUISITES None

This course can be delivered using: LM90 Software or VersaPro Software

LOCATION Crown Training and Development, Merrillville, IN

PLEASE CALL FOR A QUOTE

GE Fanuc Advanced 90-30 using Proficy ME Software

Course Description

This course covers advanced instructions (data transfer, bit manipulation, and PID loops), Genius I/O installation and configuration, Genius Hand-Held Monitor, and troubleshooting.

Topics include: Ethernet Global Data, Genius communications, and Genius I/O hardware.

Hands-on exercise include: Genius LAN setup and configuration, transferring data on an Ethernet LAN and a Genius LAN, and PID loops.

PREREQUISITES None

This course can be delivered using: LM90 Software or VersaPro Software

LOCATION Crown Training and Development, Merrillville, IN

PLEASE CALL FOR A QUOTE

GE Fanuc Basic 90-70 using Proficy ME Software

Course Description

This course examines the Series 90-70 basic hardware and Proficy Machine Edition software. The back-plane, power supply, CPU, discrete and analog I/O modules are covered as well as project creation, hardware configuration, addressing, program organization and basic programming.

This course includes: Routine maintenance such as: going online, uploading/downloading, project backup, changing modes of operation, battery replacement, setting of the PLC time/date, changing addresses and editing variable descriptions.

Exercises include: Hardware configuration, programming basic instructions (relays, timers, counters, math, and compare), examples of control circuits, alarm circuits and analog scaling, and troubleshooting features of the software and I/O card maintenance.

PREREQUISITES None

This course can be delivered using: LM90 Software or VersaPro Software

LOCATION Crown Training and Development, Merrillville, IN

PLEASE CALL FOR A QUOTE

GE Fanuc Advanced 90-70 using Proficy ME Software

Course Description

This course covers advanced instructions (data transfer, bit manipulation, parameterized subroutines, and PID loops), Genius I/O installation and configuration, Genius Hand-Held Monitor, and troubleshooting.

Topics include: Ethernet Global Data, Genius communications, and Genius I/O hardware.

Hands-on exercise include: Programming parameterized subroutines, Genius LAN setup and configuration, transferring data on an Ethernet LAN and a Genius LAN, and PID loops.

PREREQUISITES None

This course can be delivered using: LM90 Software or VersaPro Software

LOCATION Crown Training and Development, Merrillville, IN

PLEASE CALL FOR A QUOTE

GE Fanuc Basic PACSystems RX3i

$1,450.00

Clear selection
SKU: N/A.

Course Description

This course examines the Series RX3i basic hardware and Proficy Machine Edition software. The back-plane, power supply, CPU, discrete and analog I/O modules are covered as well as project creation, hardware configuration, addressing, program organization and basic programming.

This course includes: Routine maintenance such as: going online, uploading/downloading, project backup, changing modes of operation, battery replacement, setting of the PLC time/date, changing addresses and editing variable descriptions.

Exercises include: Hardware configuration, programming basic instructions (relays, timers, counters, math, and compare), examples of control circuits, alarm circuits and analog scaling, and troubleshooting features of the software and I/O card maintenance.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN


GE Fanuc Advanced PACSystems RX3i

$1,450.00

Clear selection
SKU: N/A.

Course Description

This course covers advanced instructions (data transfer, bit manipulation, user defined function blocks, and PID loops), Genius I/O installation and configuration, Genius Hand-Held Monitor, and troubleshooting.

Topics include: Ethernet Global Data, Genius communications, and Genius I/O hardware.

Hands-on exercise include: Programming user defined function blocks, Genius LAN setup and configuration, transferring data on an Ethernet LAN and a Genius LAN, and PID loops.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN


GE Fanuc Basic PACSystems RX7i

Course Description

This course examines the Series RX7i basic hardware and Proficy Machine Edition software. The back-plane, power supply, CPU, discrete and analog I/O modules are covered as well as project creation, hardware configuration, addressing, program organization and basic programming.

This course includes: Routine maintenance such as: going online, uploading/downloading, project backup, changing modes of operation, battery replacement, setting of the PLC time/date, changing addresses and editing variable descriptions.

Exercises include: Hardware configuration, programming basic instructions (relays, timers, counters, math, and compare), examples of control circuits, alarm circuits and analog scaling, and troubleshooting features of the software and I/O card maintenance.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN

PLEASE CALL FOR A QUOTE

GE Fanuc Advanced PACSystems RX7i

Course Description

This course covers advanced instructions (data transfer, bit manipulation, user defined function blocks, and PID loops), Genius I/O installation and configuration, Genius Hand-Held Monitor, and troubleshooting.

Topics include: Ethernet Global Data, Genius communications, and Genius I/O hardware.

Hands-on exercise include: Programming user defined function blocks, Genius LAN setup and configuration, transferring data on an Ethernet LAN and a Genius LAN, and PID loops.

PREREQUISITES None

LOCATION Crown Training and Development, Merrillville, IN

PLEASE CALL FOR A QUOTE

GE Fanuc Series Six and Genius I/O

Course Description

This course examines the Series Six hardware, system configuration and installation, basic instruction set and programming.

Real World Examples of motor control circuits, alarming circuits, predictive maintenance circuits, troubleshooting techniques, fault tables, analog cards and scaling, Genius I/O installation and configuration, Hand-Held Monitor, and much more are covered.

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.

Modicon Basic PLC with ProWorx 32

Course Description

This course examines the Modicon Quantum PLC covering the installation, configuration, and maintenance of a typical system. Basic functions and capabilities will be explored through construction and programming examples. Discrete I/O, timers, counters, and block moves will be covered. Modbus communications networks will be incorporated.

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.

Modicon Advanced PLC with ProWorx 32

Course Description

This course is a continuation of the basic Modicon course, and covers analog I/O, advanced instructions, such as data manipulation, sub routines, and mathematical functions. Redundant communications and Modbus Plus communications networks will also be explored.

LOCATION Crown Training and Development, Merrillville, IN

Call for a Quote

Siemens Basic PLC 505

Course Description

This course examines SLC 500 hardware, system configuration and installation, basic instruction set and programming.

Real world examples of motor control circuits, alarming circuits, predictive maintenance circuits, troubleshooting techniques, analog cards, scaling, and much more is covered.

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.

Siemens Basic PLC S7-300

Course Description

This course examines the Siemens PLC S7-300 hardware, system configuration and installation, basic instruction set and programming.

Real world examples of motor control circuits, alarming circuits, predictive maintenance circuits, troubleshooting techniques, analog cards, scaling and much more are covered.

LOCATION Crown Training and Development, Merrillville, IN

Please call for a quote.